Foniq VoIP Phone and Analog Telephone Adapter (ATA)
IPT-1000H
IPT-1000H LAN Phone is a full-featured IP-based telephone set for home telephony via Ethernet base communication. It supports SIP RFC protocol. Two 10/100BaseT embedded switch/hub RJ-45 ports allow connect to office LAN and PC on your table. It is easily interface with ADSL/Cable Modem that is provided by ITSP, ISP or Carrier company to provide VoIP services to residential and SOHO application.
Advantages
Built-in two 10/100BaseT Switch
The internal two-port Ethernet switch allows for a direct connection to a 10/100BaseT Ethernet network via an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC. It also supports 2 SIP servers running at the same time.
Big Key Button & Big LCD Screen
Those Keys are big in the phone-set. The LCD of IPT-1000H shows big characters that easy to reading for old man and children at home.
Easy to install
Users can set up the phone-set IPT-1000H by themselves through easy installation guide and steps.
Technical Specifications
Call control protocol
SIP V2, H323 v4, MGCP, Net2Phone
Voice compression
G.711 A/µ -Law, G.723.1, G.729, gsm610
Echo cancellation
G.165 16ms
Flow of the average
14K (G.723.1) ~ 51K (G.729) BPS
Interface
10/100M Base-T (RJ45)
IP Address
PPPoE, DHCP client/Static IP
Transport protocol
RTP/RTCP, UDP/TCP (Supports Silence Suppression, VAD, CNG, Acoustic Echo Cancellation, Jitter Buffering. DTMF tone detection, E.164 Dial plan and built-in H323 proxy)
Management
Standard Web Browser, phone keypad, standard telnet
Environmental operation
0°-40°C, Humidity: 10-95%, non-condensing
Power supply
100-240V AC, 9V DC 5A
Order Information
Model
VITS-FONIQ-IPT-1000H
Description
Vector-FONIQ IP LAN PHONE
VP-200
P-200 LAN Phone is a full-featured IP-based telephone set for home telephony via Ethernet base communication. It supports SIP RFC protocol. Two 10/100BaseT embedded switch/hub RJ-45 ports allow connect to office LAN and PC on your table. It is easily interface with ADSL/Cable Modem that is provided by ITSP, ISP or Carrier company to provide VoIP services to residential and SOHO application.
Advantages
Built-in two 10/100BaseT Switch
The internal two-port Ethernet switch allows for a direct connection to a 10/100BaseT Ethernet network via an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC. The system administrator can designate separate virtual LANs (VLANs) (802.1P1Q) for
the PC and other LAN IP Phones.
Big Key Button & Big LCD Screen
Those Keys are big in the phone-set. The LCD of VP-200 shows big characters that easy to reading for old man and children at home.
Easy to install
Users can set up the phone-set VP-200 by themselves through easy installation guide and steps.
Technical Specifications
Call control protocol
SIP (RFC 2543), H323 v4, MGCP
Voice compression
G.711 A/µ -Law, G.723.1, G.729, gsm610
Echo cancellation
G.165 16ms
Flow of the average
14K (G.723.1) ~ 51K (G.729) BPS
Interface
10/100M Base-T (RJ45)
IP Address
PPPoE, DHCP client/Static IP
Transport protocol
RTP/RTCP, UDP/TCP (Supports Silence Suppression, VAD, CNG, Acoustic Echo Cancellation, Jitter Buffering. DTMF tone detection, E.164 Dial plan and built-in H323 proxy)
Management
Standard Web Browser, phone keypad, telnet or palmtool
Environmental operation
0°-40°C, Humidity: 10-95%, non-condensing
Power supply
100-240V AC, 9V DC 5A, 2.7W
Order Information
Model
VITS-FONIQ-VP-200
Description
Vector-FONIQ IP LAN PHONE
ATA-2000
The ATA-2000 is a 2-port telephone extension (FXO/S) and 2 ports SOHO Router to IP network ATA series. It provides Data transfer by 10/100Mbps, voice services over IP network with easy operation and configuration. It is most suitable for SOHO and personal user in Internet communication environment.
The ATA provides IP number for end users with FreeTalk voice service. User can make phone call via Internet now. No more long distance and international telephony fee! It also connects one computer without another IP sharing. The ATA-2000 also can connect one computers with embedded IP sharing and DHCP server function.
The ATA-2000 can provides one telephone number (extension) using the FXS port in the device for end users and the other phone port acts as a lifeline connected to an existing PSTN line. Calls can be make via Internet, and saving end users the expensive long distance and international telephony fee! User can still make outgoing phone call even when compared to external (PABX) power failed.
Technical Specifications
Physical interface
RJ-45
- WAN X 1 for internet connection
- LAN X 1 for PC connection
RJ-11
- Phone X 1 for connect to regular phone.
Power
- Voltage : DC 12 V
- Current : 1 A
Dimension
- 9.9 X 9.9 X 3.2 cm
Protocol
SIP RFC 3261
- Outbound proxy
- Support IP or domain name for primary and secondary proxy address and auto switching is enabled.
Call function
Call Forwarding
Call Transfer
Un-connection LED alarm
Call Hold
Calling Number Delivery
- PPPoE (RFC 2516)
- Account / password can be saved
- Auto reconnection after disconnection
- DHCP client (for LAN Port)
- Static IP
DHCP Server and NAT
Bridge for LAN interface
Diff. Server
Support SNTP
System management
Support Web, Telnet for remote control
Username / Password for login to make configuration
Firmware update / upgrading
TFTP / FTP / Web remote update
Environment
AC Power
110~220V ± 10V 60Hz ± 3Hz
Environment
Temperature：0°C~40°C
Humidity：10％~90％RH
Order Information
Model
VITS-FONIQ-ATA-2000
Description
Vector-FONIQ IP ATA-2000
ATA-S
The ATA-S is a one-port telephone extension (FXS) and 2 ports SOHO Router to IP network ATA-S series. It provides Data transfer by 10/100Mbps, voice services over IP network with easy operation and configuration. It is most suitable for SOHO and personal user in Internet communication environment.
The ATA provides IP number for end users with FreeTalk voice service. User can make phone call via Internet now. No more long distance and international telephony fee! It also connects one computer without another IP sharing. The ATA-S also can connect one computers with embedded IP sharing and DHCP server function.
The ATA-S can provides one telephone number (extension) using the FXS port in the device for end users. Calls can be make via Internet, and saving end users the expensive long distance and international telephony fee! User can still make outgoing phone call even when compared to external (PABX) power failed.
Technical Specifications
Physical interface
RJ-45
- WAN X 1 for internet connection
- LAN X 1 for PC connection
RJ-11
- Phone X 1 for connect to regular phone.
Power
- Voltage : DC 12 V
- Current : 1 A
Dimension
- 9.9 X 9.9 X 3.2 cm
Protocol
SIP RFC 3261
- Outbound proxy
- Support IP or domain name for primary and secondary proxy address and auto switching is enabled.
Call function
Call Forwarding
Call Transfer
Un-connection LED alarm
Call Hold
Calling Number Delivery
